Starter set with portable, water-resistant meter for testing pH, electroconductivity, and total dissolved solids, provided with solutions and sachets | Calibration check function to validate instrument performance | Automatic temperature compensation (ATC) to eliminate the need for extra calculations | Alert system when low battery and potential measurement error | On-screen user and calibration guides

The HI 9813-6N waterproof multiparameter meter measures pH, electroconductivity (EC), and total dissolved solids (TDS), making it suitable for designed specifically for agricultural applications such as hydroponics, greenhouses, farming and nurseries. The HI 9813-6N comes with a HI 1285-6 combination probe with DIN connector and 1 m/3.3 ft. cable, a starter set of calibration and cleaning solution sachets, a check solution sachet, a 9V battery and instructions. The attached HI 1285-6 polyprolylene probe features a fiber junction and gel electrolyte. The meter has a calibration check function (Cal-Check) to validate instrument performance and an LCD screen. If the meter is calibrated, a message will indicate Probe is OK, but if the meter needs cleaning the device will direct the user to Clean Probe and Calibrate. The HI 9813-6N tester functions in temperatures of 0.0 to 60.0 degrees C, and has a range of pH 0.0 to 14.0 (+ or - 0.1 pH) with a resolution of 0.1 pH. For EC, the device has a range of 0.00 to 4.00 mS/cm (+ or - 2% F.S. mS/cm) and a resolution of 0.01 mS/cm. For TDS, the device has a range of 0 to 1999 ppm (mg/L) (+ or -...